MonkeySqueeze V3.0.1

Post a reply

Visual Confirmation

To prevent automated access and spam, you are required to confirm that you are human. Please place a check mark next to all images of monkeys or apes. If you cannot see any images, please contact the Board Administrator.

Smilies
:D :) :( :o :-? 8) :lol: :x :P :oops: :cry: :evil: :roll: :wink:
BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: MonkeySqueeze V3.0.1

Re: MonkeySqueeze V3.0.1

Post by Gingernut63 » Thu Mar 21, 2013 1:25 pm

Demins wrote:It seems my problem is solved!

I upgraded to LMS 7.7.2, cleaned the cache/mediadatabase and used the same disk for LMS as I do for MM.

One of these, or any combination, seems to have done the trick...

I think upgrading and cleaning the cache/mediadatabase could have been enough ;-)

Demins


Glad to see you have resolved the problem and now have it working, takes the pressure off me. ;)

Happy MonkeySqueezing
Gingernut63

Re: MonkeySqueeze V3.0.1

Post by Demins » Thu Mar 21, 2013 1:10 pm

It seems my problem is solved!

I upgraded to LMS 7.7.2, cleaned the cache/mediadatabase and used the same disk for LMS as I do for MM.

One of these, or any combination, seems to have done the trick...

I think upgrading and cleaning the cache/mediadatabase could have been enough ;-)

Demins

Re: MonkeySqueeze V3.0.1

Post by Demins » Mon Mar 18, 2013 11:43 am

I just installed MM4 Portable on the same disk (C) as LMS
I also tried to install MonkeySqueeze 3.0.1.
This resulted in two new alerts:

Image

and

Image

Fout=Error
Niet nader omschreven fout=Non specified error
(Dutch)

Demins

PS

Image

Image

Image

Re: MonkeySqueeze V3.0.1 playlist problem

Post by Demins » Mon Mar 18, 2013 10:30 am

Gingernut63 wrote:
Demins wrote:Hi,
Since a few weeks I have a problem with MonkeySqueeze.
Not all songs in a MediaMonkey playlist are being sent to the Squeezeboxsystem. I can find no reason why.
I use Windows 7 32 bit, MediaMonkey 4.0.5.1496 (portable) and MonkeySqueeze 3.0.1
The same problem occurs when usinga fresh installed MediaMonkey 4.0.7.1511 (portable).
Logitech Media Server Versie: 7.7.1 - r33893
MonkeySqueeze worked fine up to now.
Can you help?
Thanks, Demins


Hi Demins

MonkeySqueeze works by sending the addresses of the music files in the MediaMonkey playlist to LMS/Squeezebox device. The files are then located and added to the playlist of the Squeezebox device. Sometimes LMS/Squeezebox device will not find the files if:

1. they are not located on the PC where LMS is installed
2. they have an unusual naming convention
3. they are located in folders with a different security access
4. LMS is installed on a NAS/Server and the music files are not located in the Media Folder as defined in LMS > Settings > Media Folder.

Add music to the playlist in MediaMonkey and then enable MonkeySqueeze. Do all the tracks appear the LMS playlist? If not, which tracks are not showing up. Have you added some files recently and they are in a different location to your normal music folder?

Hope this info helps. Let me know how you get on.

Cheers Gingernut63



Hi Gingernut,

1. The audiofiles are in fact located on an extern hd (usb) MM Portable is located on the same disk. LMS is installed on my laptop. The hd is connected with the laptop. This has always worked. When I use a playlist with only tracks located on the same disk as LMS is installed, the same problem occurs (now only 8 of 18 songs appear; see 3).
2. Not as far as I can see.
3. I don't think so. When I make a playlist of an album (tracks all located in the same folder) only 9 of the 18 tracks appear in the LMS/SqueezeboxRadio playlist. Everytime I try, gives the same result (the same 9 songs).
4. I do not use a NAS.

Could LMS be corrupted?
Could MM be corrupted?

I use MM 3.2.5 1306 installed on my laptop for tagging and (sometimes simultaneously) MM 4.0.5.1496 (portable) on my hd to play music.
MM 3 makes no use of MonkeySqueeze.

Thanks in advance for your advice.

Demins

Re: MonkeySqueeze V3.0.1

Post by Demins » Mon Mar 18, 2013 6:24 am

Hi Gingernut,

Thanks for your quick response.
I will answer your post later today, but for now I want to share an alert message I received this morning. It might be helpfull (for you, that is).

Image

Error #424 - Runtimefout (failure/error) Microsoft VBScript
Object vereist (needed/required): 'Song Value'
File: *G:\0000 MediaMonkey\Scripts\Auto\MonkeySqueeze.vbs*, Line 331, Column: 2

G is an external harddisk (usb). All my audiofiles are on this disk. MediaMonkey Portable is also on this disk (In the folder 0000 MediaMonkey).
This has worked for years.

Greetings, till later

Demins

Re: MonkeySqueeze V3.0.1 playlist problem

Post by Gingernut63 » Sun Mar 17, 2013 2:06 pm

Demins wrote:Hi,
Since a few weeks I have a problem with MonkeySqueeze.
Not all songs in a MediaMonkey playlist are being sent to the Squeezeboxsystem. I can find no reason why.
I use Windows 7 32 bit, MediaMonkey 4.0.5.1496 (portable) and MonkeySqueeze 3.0.1
The same problem occurs when usinga fresh installed MediaMonkey 4.0.7.1511 (portable).
Logitech Media Server Versie: 7.7.1 - r33893
MonkeySqueeze worked fine up to now.
Can you help?
Thanks, Demins


Hi Demins

MonkeySqueeze works by sending the addresses of the music files in the MediaMonkey playlist to LMS/Squeezebox device. The files are then located and added to the playlist of the Squeezebox device. Sometimes LMS/Squeezebox device will not find the files if:

1. they are not located on the PC where LMS is installed
2. they have an unusual naming convention
3. they are located in folders with a different security access
4. LMS is installed on a NAS/Server and the music files are not located in the Media Folder as defined in LMS > Settings > Media Folder.

Add music to the playlist in MediaMonkey and then enable MonkeySqueeze. Do all the tracks appear the LMS playlist? If not, which tracks are not showing up. Have you added some files recently and they are in a different location to your normal music folder?

Hope this info helps. Let me know how you get on.

Cheers Gingernut63

MonkeySqueeze V3.0.1 playlist problem

Post by Demins » Sun Mar 17, 2013 11:08 am

Hi,
Since a few weeks I have a problem with MonkeySqueeze.
Not all songs in a MediaMonkey playlist are being sent to the Squeezeboxsystem. I can find no reason why.
I use Windows 7 32 bit, MediaMonkey 4.0.5.1496 (portable) and MonkeySqueeze 3.0.1
The same problem occurs when usinga fresh installed MediaMonkey 4.0.7.1511 (portable).
Logitech Media Server Versie: 7.7.1 - r33893
MonkeySqueeze worked fine up to now.
Can you help?
Thanks, Demins

Re: MonkeySqueeze V3.0.1

Post by Gingernut63 » Sat Mar 16, 2013 1:32 pm

lpkuracina wrote:Issue was with my Logitec Media Server. When my PC goes to sleep it get hung. Once I stop the MediaServer and start it again then everything works. McAfee still running.


Thanks for the response, more info for other users. Good to know that McAfee works with your setup.

Cheers
Gingernut63

Re: MonkeySqueeze V3.0.1

Post by lpkuracina » Sat Mar 16, 2013 12:32 pm

Issue was with my Logitec Media Server. When my PC goes to sleep it get hung. Once I stop the MediaServer and start it again then everything works. McAfee still running.

Re: MonkeySqueeze V3.0.1

Post by Gingernut63 » Fri Mar 15, 2013 7:05 pm

lpkuracina wrote:This script use to work for me but I now get the following error:
Error # 2147467259
File: "C\Users\my name\AppData\Roaming\MediaMonkey\Scripts\Auto\MonkeySqueeze.vbs", Line 388, Column: 2...

It has been a while since I ran it so a lot has changed since then. I did add McAfee (v11.6) as my security program...

Do I have to unistall McAfee to fix the Registry? Or can I just edit it?


Hi lpkuracina, Yes you have to uninstall McAfee as stated by neurox:
I had zero ability running any vb script out of Media Monkey (or any other program) until I uninstalled McAfee, rebooted, then ran their Removal Tool, then rebooted again
.

Re: MonkeySqueeze V3.0.1

Post by lpkuracina » Fri Mar 15, 2013 4:56 pm

lpkuracina wrote:This script use to work for me but I now get the following error:
Error # 2147467259
File: "C\Users\my name\AppData\Roaming\MediaMonkey\Scripts\Auto\MonkeySqueeze.vbs", Line 388, Column: 2

I am running Window's 7 and MediaMonkey 4.0.7.1511, Logitec Media Server 7.7.2 /r33893

It has been a while since I ran it so a lot has changed since then. I did add McAfee (v11.6) as my security program.

My Registry shows for each of these entries:
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{B54F3741-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{B54F3742-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{B54F3743-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32

C:\Windows\SysWOW64\vbscript.dll

I'm confused as looking at the one article my registry is correct. Maybe I have a different problem.

When I run the fix_kav_vbs I get an error: some keys are open by the system or some other process.

Re: MonkeySqueeze V3.0.1

Post by lpkuracina » Fri Mar 15, 2013 4:33 pm

This script use to work for me but I now get the following error:
Error # 2147467259
File: "C\Users\my name\AppData\Roaming\MediaMonkey\Scripts\Auto\MonkeySqueeze.vbs", Line 388, Column: 2

I am running Window's 7 and MediaMonkey 4.0.7.1511, Logitec Media Server 7.7.2 /r33893

It has been a while since I ran it so a lot has changed since then. I did add McAfee (v11.6) as my security program.

My Registry shows for each of these entries:
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{B54F3741-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{B54F3742-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{B54F3743-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32

C:\Windows\SysWOW64\vbscript.dll

Do I have to unistall McAfee to fix the Registry? Or can I just edit it?

When I run the fix_kav_vbs I get an error: some keys are open by the system or some other process.

Re: MonkeySqueeze V3.0.1

Post by Gingernut63 » Sun Mar 10, 2013 12:19 am

Thank you Neurox for your prompt assistance in helping pcmoan with this issue. I have been watching from afar and saw no need to intervene. I also learned something new in the process.

Cheers
Gingernut63

Re: MonkeySqueeze V3.0.1

Post by Peke » Sat Mar 09, 2013 5:36 pm

Please let me know if there is a need for x86 version of REG file?

Re: MonkeySqueeze V3.0.1

Post by pcmoan » Sat Mar 09, 2013 4:59 pm

Hello Neurox-

Thank you very much for you prompt reply. You were spot on in that the problem was related to McAfee. I don't use McAfee but it got inadvertently installed when I updated Java (it comes bundled these days). First I ran the query you provided and validated that the path had been changed (by McAfee). Next, I ran the McAfee removal tool then re-ran the query to verify the path was reset (which it was). MediaMonkey no comes up without the script error and I've successfully configured MonkeySqueeze and validated that it works.

Apologies for the length of time to reply (given that you responded almost immediately to my problem). I had set the task of getting MonkeySqueeze running aside until I had some time (which is limited with 3 small children etc). Today, I had the time, and resolution moved along much quicker than I figured. Very straightforward instructions on your end etc.

Best Regards,
Patrick

Top