my SD card is recognised by windows (get a windows on insertion, etc..) but it does not appear in the media tree, therefore can't sync. any idea what triggets a device to showup in the MMW media tree ?
The only other option is to put the SD card in the phone and connect the phone to MMW. This works ok, but i think the sync speed might be better by connecting directly the SD card in the PC slot where MMW is installed. At least it is worth checking..
SD card not shows in media tree
Moderator: Gurus
SD card not shows in media tree
Last edited by Lowlander on Thu Nov 13, 2014 1:54 pm, edited 1 time in total.
Reason: Moved to correct forum
Reason: Moved to correct forum
Re: SD card not shows in media tree
Maybe it's disabled under Tools > Options > Portable Device Sync.
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: SD card not shows in media tree
no - all devices are checked - there must be something inside MMW as windows recognises ok.
Re: SD card not shows in media tree
Is it shown under My Computer as drive?
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: SD card not shows in media tree
Yes i can sée it as a drive in mycomputer
Re: SD card not shows in media tree
Then you can use d_USBMass1.dll to set it up for syncing.
If you want to know why it isn't recognized as portable device you can capture the connecting of the card to the PC in a debug log (step 4b) and send the log to support for developer analysis: http://www.mediamonkey.com/forum/viewto ... ?f=12&t=69
If you want to know why it isn't recognized as portable device you can capture the connecting of the card to the PC in a debug log (step 4b) and send the log to support for developer analysis: http://www.mediamonkey.com/forum/viewto ... ?f=12&t=69
Download MediaMonkey | License
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Help: Knowledge Base | MediaMonkey for Windows 5 | MediaMonkey for Android
Lowlander (MediaMonkey user since 2003)
Re: SD card not shows in media tree
Thanks, this was the right thing to do: Select the USB device (d_USBMass1.dll) in the device list and configure it.
As per the speed of the sync through the SD in PC slot compared to the USB link to the telephone, there is no clear better option, both are quite the same.
As per the speed of the sync through the SD in PC slot compared to the USB link to the telephone, there is no clear better option, both are quite the same.