V 2194
After rebooting MM the new location is no longer in the list of Locations
Add/Rescan - Add Location does not persist
Moderator: Gurus
Add/Rescan - Add Location does not persist
David
____________________________
Windows 10
MM 5 Beta
____________________________
Windows 10
MM 5 Beta
Re: Add/Rescan - Add Location does not persist
Hi David,
I can't replicate this in 2194.
Did you close MM5 normally?
MM5 seems to delay persistence of some configuration changes until normal shutdown
Meaning that changes can be lost if MM5 ends abnormally or is still open when the PC is powered off.
Possible this is what you saw?
Whether or not this is desirable behaviour is another matter of course.
I can't replicate this in 2194.
Did you close MM5 normally?
MM5 seems to delay persistence of some configuration changes until normal shutdown
Meaning that changes can be lost if MM5 ends abnormally or is still open when the PC is powered off.
Possible this is what you saw?
Whether or not this is desirable behaviour is another matter of course.
Want a dark skin for MM5? This is the one that works best for me .. elegant, compact & clear.
Re: Add/Rescan - Add Location does not persist
I'm not powering the PC off, just exiting MM then opening it again. MM operates normally & there's no error messages
David
____________________________
Windows 10
MM 5 Beta
____________________________
Windows 10
MM 5 Beta
Re: Add/Rescan - Add Location does not persist
@Barry - you were probably right. The problem has gone away. It is hard to tell what MM is doing sometimes as the progress bar stops but processing continues without any indication of what it is or the duration. Other times it appears to be processing something but has actually frozen.
David
____________________________
Windows 10
MM 5 Beta
____________________________
Windows 10
MM 5 Beta