Page 1 of 1

MMW 2024.1.0.3113 Volume Changing Issues [#21574]

Posted: Thu Apr 24, 2025 5:34 pm
by Tetrachromacy
Hello, with the new update I've noticed a particularly bad issue with MM. Sometimes after you've left MM idle for a while, or if you pause playback and then switch to a new track, it will play the track at 100% volume even if the volume bar is set to something else.

So say I have it playing at 30% and a song ends, and then I take about 1 minute to find a new album to play. When I queue it up and the audio starts, it plays the song at full volume even though the volume bar is still at 30%. If you engage with the volume bar at that point (ie to scroll down once for -5% volume) the audio will immediately change to sound like the number it is actually set at (30%). Keep it mind this is all only happening audio-wise, the volume bar doesn't actually physically set itself to 100% - it just sounds like it is.

This can be quite horrible, getting headphone blasted at 100% volume. This has been happening persistently since the new update.
Top

Re: MMW 2024.1.0.3113 Volume Changing Issues

Posted: Thu Apr 24, 2025 5:42 pm
by Lowlander
Are you using WASAPI set to Exclusive Mode? Try DirectSound, do you see the same?

Re: MMW 2024.1.0.3113 Volume Changing Issues

Posted: Thu Apr 24, 2025 6:10 pm
by Tetrachromacy
Lowlander wrote: Thu Apr 24, 2025 5:42 pm Are you using WASAPI set to Exclusive Mode? Try DirectSound, do you see the same?
I am using WASAPI with exclusive mode turned off (which I believe is the default because I've never tooled around in this menu before).

It appears that switching to DirectSound as recommended has alleviated the issue. That being said, I was always using the WASAPI output and it never used to do that, so maybe there is an issue with it.

Re: MMW 2024.1.0.3113 Volume Changing Issues

Posted: Fri Apr 25, 2025 1:43 pm
by rusty
We've been unable to replicate this, but believe it's fixed based on debug logs shared with us. Can you confirm whether the newest beta build at viewtopic.php?p=527033#p527033 solves this for you?

Thanks!

-Rusty

Re: MMW 2024.1.0.3113 Volume Changing Issues [#21574]

Posted: Wed Oct 01, 2025 9:10 pm
by Danwagz
Hi, I just wanted to add that I am currently experiencing this same issue, running MediaMonkey Gold version 2024.1.0.3113 with WASAPI output set.

Re: MMW 2024.1.0.3113 Volume Changing Issues [#21574]

Posted: Thu Oct 02, 2025 2:16 am
by Peke
Danwagz wrote: Wed Oct 01, 2025 9:10 pm Hi, I just wanted to add that I am currently experiencing this same issue, running MediaMonkey Gold version 2024.1.0.3113 with WASAPI output set.
Please try using latest build from https://www.mediamonkey.com/forum/viewt ... 86639&sd=d

Re: MMW 2024.1.0.3113 Volume Changing Issues [#21574]

Posted: Fri Oct 03, 2025 8:59 am
by Danwagz
Thanks, that seems to have fixed the issue for me :D