Send to Folder move or copy, successive windows only open to the right [#16905]

[jmikelong]

Build 2264 portable install. When trying to send a file to another folder by move or copy, the successive windows only open to the right until they are off screen rather than opening to the left if they reach the screen edge. I went back and checked build 2262 and it did the same. Build 2251 worked properly.

[jmikelong]

I was experimenting with this error. I usually use MMW on a second (identical) monitor at 1920 x 1080 (Recommended) set at 100%. I switched to one monitor and the successive windows act properly. Up until build 2262 this was not a problem.

[jmikelong]

I have run every build since 2226. 2262 and 2264 Seem to act normally on a single monitor but with dual monitors the successive move or copy menus can all go to the right off the screen and randomly clip the menus on the right margin and on the bottom. The bottom clipping cuts off some of the options to select.

[Lowlander]

So, the problem is the sub-menu's that are opening incorrectly for you (you mentioned windows) when browsing the folder structure through Send To > Move or Copy? This is working for me, staying contained on a single monitor.

Do you have a different than default DPI setting and monitors of varying resolutions settings? Is the secondary monitor to the right or left of the primary monitor. Are you using MediaMonkey maximized or not?

[jmikelong]

Yes the sub menus are not staying contained on dual monitors. Both monitors are the same brand and size and configuration. I have used monitor 1 or monitor 2 as the only monitor and both work okay either in maximized mode or not. When I switch to dual monitor, sub menus go right and some sub menus get cut off to the right and the bottom even if I don't maximize the window. both monitors are set to 100% and 1920 x 1080 resolution. As I stated earlier, build 2226 through 2251 did not have this problem and were contained within the window maximized or not. These problems are occur randomly since if I restart MMW I can get the problem to go away for only a while. I have changed nothing on my DPI settings since build 2226. It seems that MMW has a problem with dual monitors that it didn't have prior to build 2261. I have read that others have had the sub menu clipping which that the gurus can't duplicate (on a single monitor?).

[Lowlander]

You seem to be referring to high DPI problems.

The best would be to capture this in a debug log (step 4b) and if you can a screencast of this happening (it shows the developers what you see): https://www.mediamonkey.com/forum/viewt ... 30&t=86643

[jmikelong]

I recorded a debug log and simultaneously recorded a screen capture. There is a long pause at the start while I waited for the debug program to catch up. I opened MM5 at the start of the video. You can view both at https://1drv.ms/u/s!Aip5QzC3ZbA6kVnJcj8 ... a?e=AnAohq

[Lowlander]

Added as: https://www.ventismedia.com/mantis/view.php?id=16905

[jmikelong]

moved to new topic