MMA doesn't see MMW

chrise3112 · Post by **chrise3112** » Mon Dec 03, 2012 11:53 am

Afternoon - I've installed the MMW 4.1 beta and enabled Media Sharing and Wifi Sync, but I can't see the server from the MMA app on my phone.

Have I missed a step somewhere?

Thanks
Chris

Post by **Lowlander** » Mon Dec 03, 2012 12:15 pm

Are both on the same network? Sometimes wifi networks are guest networks and not connected to the internal wired network.

chrise3112 · Post by **chrise3112** » Mon Dec 03, 2012 12:33 pm

Yes. I can see the upnp server that's running on my NAS box OK from another media app on my phone.

Just a thought does it make a difference that I'm running windows 8?

Post by **Lowlander** » Mon Dec 03, 2012 12:37 pm

It shouldn't. Have you checked Options > Select sync server on MMA?

chrise3112 · Post by **chrise3112** » Mon Dec 03, 2012 12:53 pm

Yes. I get <no devices found>

Post by **Lowlander** » Mon Dec 03, 2012 12:57 pm

It may be a Firewall issue on the machine that's running MediaMonkey.

chrise3112 · Post by **chrise3112** » Mon Dec 03, 2012 1:18 pm

Not looked at that. What ports do I need to enable?

Post by **Lowlander** » Mon Dec 03, 2012 1:44 pm

Don't know for wifi syncing. Have you tried enabling the Media Server in MediaMonkey and see if other Apps see it?

nohitter151 · Post by **nohitter151** » Mon Dec 03, 2012 1:49 pm

chrise3112 wrote:Not looked at that. What ports do I need to enable?

The port is specified under the server options (uPnp/DLNA server tab)

I'd be surprised if Windows firewall was the problem though, normally you allow an exception the first time you start MM (when prompted by Windows firewall).

chrise3112 · Post by **chrise3112** » Mon Dec 03, 2012 5:33 pm

Windows firewall has two rules set for MediaMonkey - one for UDP, all ports. The other for TCP all ports.

Nothing specifically for the port mentioned in MMW, though.

Here's what's set in MMW...

I can't see this server from other devices at all, but the Windows Media Player server on this PC is shown. Can I have more than one running on a PC? (I know my NAS has 2)

Post by **Lowlander** » Mon Dec 03, 2012 6:05 pm

MediaMonkey is using port 49276. I don't think there is any issue with running multiple DLNA servers as long as they use different ports. You can configure the server and make sure that your devices are enabled under the Devices tab (if listed).

chrise3112 · Post by **chrise3112** » Tue Dec 04, 2012 6:10 pm

Sorry for the delay - manic day at work.

I don't see any devices on that tab.

I can't see the MMW server from any DLNA client (either wifi or wired)

C.

Post by **rusty** » Thu Dec 06, 2012 2:33 pm

Perhaps this is another example of http://www.ventismedia.com/mantis/view.php?id=10164 .
We'll find out once this is fixed.

-Rusty

dewils80 · Post by **dewils80** » Thu Dec 06, 2012 4:06 pm

If your 'droid can't find your windows server, make sure your windows machine is discoverable in your wifi advanced settings.

chrise3112 · Post by **chrise3112** » Thu Dec 06, 2012 4:32 pm

Dewils80 - where are those settings? I'm running on a windows 8 pc with a cabled connection.

Thanks
Chris

MMA doesn't see MMW

MMA doesn't see MMW

Re: MediaMonkey for Android FAQ

Re: MediaMonkey for Android FAQ

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

Re: MMA doesn't see MMW

About MediaMonkey for Android

Re: MMA doesn't see MMW