WebHelp:iPod Synchronization/4.0: Difference between revisions

From MediaMonkey Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 29: Line 29:


#Start MediaMonkey and plug in the device  
#Start MediaMonkey and plug in the device  
#Go to '''Tools''' > '''Options''' > '''Portable Device Sync''', select your device (make sure that its checkbox is checked), and press 'Configure'. If your device doesn't show up in the list, try restarting MediaMonkey.  
#Go to '''Tools''' > '''Options''' > '''Portable Device Sync''', select your devices' Device Profile (make sure that its checkbox is checked), and press 'Configure'. If your device doesn't show up in the list, try restarting MediaMonkey.  
#In the '''Summary''' tab, you can leave the defaults as they are.
#In the '''Summary''' tab, you can leave the defaults as they are.
##Scan as soon as the device is connected will scan the media files on your device at the moment you connect it. Scanning will happen before Auto-Sync or when you browse the device if this option is disabled.
**'''Scan as soon as the device is connected''' will scan the media files on your device at the moment you connect it. Scanning will happen before Auto-Sync or when you browse the device if this option is disabled.
##Auto-Sync as soon as the device is connected will start the sync process immediately when the device is connected to your PC and MediaMonkey is running.
**'''Auto-Sync as soon as the device is connected''' will start the sync process immediately when the device is connected to your PC and MediaMonkey is running.
#In the '''Auto-sync Options''' tab, enable 'Delete Tracks that aren't on the Auto-sync List' and 'Confirm deletion' and enter \iPod_Control\Games_RO\ in the 'Except Folders' field. With these enabled, whenever you Auto-sync, you'll be given the option of deleting Audio tracks that aren't on the Auto-sync list, except for those that are used in iPod games.  
#In the '''Auto-sync (-->Device)''' tab you can select what media from the MediaMonkey Library should be synced to your device. You can select Playlists, Collections or specific Artists, Albums, Genres, etc. from a Collection. For Collections you can have it sync a random subset which is useful if you have more content to sync than fits on your device.
#In the '''Auto-sync List''' tab, choose which Tracks to sync.  
**'''Delete other files and playlists from the device''' will allow MediaMonkey to remove files from the device on sync that aren't selected to be synced to the device. It needs to be set to '''All other media files''' if you want files added to the device from other sources or files that have been removed from the MediaMonkey Library to be deleted from your device on sync.
#In the [[{{WebHelp:Links|Auto-Conversion%20Configuration}}|Auto-Conversion]] tab, choose whether to convert Tracks to MP3 (note: 'Level volume' is ''not'' needed for iPods since MediaMonkey syncs Soundcheck values which the iPod uses to level volume).
#Under '''Options''' > [[{{WebHelp:Links|Auto-Conversion%20Configuration}}|'''Auto-Conversion''']] you can choose whether to convert your media on sync.
**Files in a format not supported by your device require conversion on sync to a format your device does support.
**You can convert files to a format that uses less space (like FLAC to MP3) to fit more files on your device.
**Auto-Conversion on sync does not modify the originals in your MediaMonkey Library.
**Volume Leveling is not available since MediaMonkey syncs Sound Check values which Apple devices use to level volume.


== Auto-Sync your Tracks ==
== Using Auto-Sync  ==


#Set the mode of the '''Synchronize''' button on the toolbar to 'Auto-Synchronize', and if multiple devices exist, choose your iPod using the small button adjacent to the Synchronize button.  
*If you enabled ''Auto-Sync as soon as the device is connected'' in the Device Profile you just need to connect your device for sync to take place. Prior to connecting your device you can adjust what will be synced in the Device Profile under '''Tools''' > '''Options''' > '''Portable Device Sync'''.
#Connect your iPod to your PC and click the'''Synchronize''' button. After a bit of time, you should be asked whether to delete Tracks from the iPod. Go ahead and delete them (they'll be resynched from the PC).
*If did not enable ''Auto-Sync as soon as the device is connected'' you can connect your device, make any adjustments needed in the Device Profile and then use the Sync button in the Media Tree next to your device. This will sync according to the Device Profile settings, but provides control over when sync takes place.


Tracks will sync to the iPod per your configuration.
== Manually Sync Selected Files  ==


== Manually Sync your Tracks  ==
If you want to do a one-time manual sync of selected files:


If you want to do a one-time manual sync of set of Tracks:
*Select a Playlist, AutoPlaylist or a group of files and drag them onto your device in the Media Tree.
*Select the files you wish to sync, right-click and use '''Send to''' > ''your device''.
*From the Now Playing Dialog, click '''Copy''' > '''Copy Playlist to Portable Device''' in the Now Playing Controls Toolbar.


*Select a Playlist, AutoPlaylist or a group of tracks and drag them onto the Device node or onto the Device button.<br>or<br> Select the tracks you wish to sync and right-click '''Send to''' &gt; '''iPod Device''' .<br> or<br> From the Now Playing Dialog, click '''Copy''' &gt; '''Copy to Portable Device'''.
The selected files and playlists will sync to your device per your configuration in the Device Profile.  
*Or, if you plan on always synchronizing in this manner, set the mode of the '''Synchronize''' button on the toolbar to 'Synchronize Selected'. Then Select a Playlist, AutoPlaylist, or group of Tracks and click the '''Synchronize''' button.


The selected Tracks and Playlists will sync to the iPod per per your configuration.
== Disconnecting your Device  ==


== Disconnecting the iPod ==
iOS devices like the iPhone, iPod Touch and iPad don't feature an option to safely disconnect. Most other iPod models can be safely disconnected using the eject button with your device in the Media Tree.
 
MediaMonkey can be configured to automatically close the connection to the PC after synchronization. If this feature isn't enabled, then right-click on the iPod and click 'Safely Remove Device'.  




See: [http://www.mediamonkey.com/wiki/index.php/Guide_to_ipod_sync MediaMonkey iPod Wiki]
See: [http://www.mediamonkey.com/wiki/index.php/Guide_to_ipod_sync MediaMonkey iPod Wiki]
   {{WebHelpFooter}}
   {{WebHelpFooter}}

Revision as of 21:03, 21 February 2017

Prepare the iPhone/iPod/iPad

If you have an iOS device like an iPhone, iPad or iPod Touch you'll need to have iTunes installed. iTunes is available from the Apple website. Most other iPod devices don't require iTunes. An alternative to iTunes is CopyTrans Drivers which will only install the required iTunes components for syncing, however this isn't officially supported.

If you have iTunes installed you need to make sure it is not set to automatically sync your media to your device:

  1. Connect your device and run iTunes
  2. Click on your device in the iTunes tree and select the Summary tab
    1. Disable 'Open iTunes when this device is connected'
    2. Enable 'Manually manage music and videos'
  1. Select the 'Music' tab in iTunes
    1. Disable 'Sync Music'
    2. Enable 'Display Album Artwork on your iPod'
  2. On the Movies, TV Shows, and Podcasts tabs, disable the 'Sync Movies', 'Sync TV Shows', 'Sync Podcasts' options.
  3. Eject the iPod and close iTunes

Do not uninstall iTunes if you are using an iOS device like iPhone, iPod Touch or iPad.

Note: In some cases it may be necessary to delete existing content from the device by using the iTunes Updater to restore the device to its factory condition.

Preparing Your Files

Apple devices feature Sound Check which when enabled play your music files at the same volume. MediaMonkey supports Sound Check if your music files have a known Track Volume value. If they don't you can:

  1. Manually analyze the volume of music files in your Library using Tools > Analyze Volume
  2. Enable automatic volume analysis via Tools > Options > Volume Leveling > by enabling Automatically analyze volume of unanalyzed files

Configure the Device in MediaMonkey

  1. Start MediaMonkey and plug in the device
  2. Go to Tools > Options > Portable Device Sync, select your devices' Device Profile (make sure that its checkbox is checked), and press 'Configure'. If your device doesn't show up in the list, try restarting MediaMonkey.
  3. In the Summary tab, you can leave the defaults as they are.
    • Scan as soon as the device is connected will scan the media files on your device at the moment you connect it. Scanning will happen before Auto-Sync or when you browse the device if this option is disabled.
    • Auto-Sync as soon as the device is connected will start the sync process immediately when the device is connected to your PC and MediaMonkey is running.
  1. In the Auto-sync (-->Device) tab you can select what media from the MediaMonkey Library should be synced to your device. You can select Playlists, Collections or specific Artists, Albums, Genres, etc. from a Collection. For Collections you can have it sync a random subset which is useful if you have more content to sync than fits on your device.
    • Delete other files and playlists from the device will allow MediaMonkey to remove files from the device on sync that aren't selected to be synced to the device. It needs to be set to All other media files if you want files added to the device from other sources or files that have been removed from the MediaMonkey Library to be deleted from your device on sync.
  1. Under Options > Auto-Conversion you can choose whether to convert your media on sync.
    • Files in a format not supported by your device require conversion on sync to a format your device does support.
    • You can convert files to a format that uses less space (like FLAC to MP3) to fit more files on your device.
    • Auto-Conversion on sync does not modify the originals in your MediaMonkey Library.
    • Volume Leveling is not available since MediaMonkey syncs Sound Check values which Apple devices use to level volume.

Using Auto-Sync

  • If you enabled Auto-Sync as soon as the device is connected in the Device Profile you just need to connect your device for sync to take place. Prior to connecting your device you can adjust what will be synced in the Device Profile under Tools > Options > Portable Device Sync.
  • If did not enable Auto-Sync as soon as the device is connected you can connect your device, make any adjustments needed in the Device Profile and then use the Sync button in the Media Tree next to your device. This will sync according to the Device Profile settings, but provides control over when sync takes place.

Manually Sync Selected Files

If you want to do a one-time manual sync of selected files:

  • Select a Playlist, AutoPlaylist or a group of files and drag them onto your device in the Media Tree.
  • Select the files you wish to sync, right-click and use Send to > your device.
  • From the Now Playing Dialog, click Copy > Copy Playlist to Portable Device in the Now Playing Controls Toolbar.

The selected files and playlists will sync to your device per your configuration in the Device Profile.

Disconnecting your Device

iOS devices like the iPhone, iPod Touch and iPad don't feature an option to safely disconnect. Most other iPod models can be safely disconnected using the eject button with your device in the Media Tree.


See: MediaMonkey iPod Wiki


English  • Deutsch • español • français


Additional Help: Knowledge Base | Forum | MediaMonkey Support | MediaMonkey for Android Help | MediaMonkey 5 Help | MediaMonkey 4 Help

Retrieved from "https://www.mediamonkey.com/wiki/index.php?title=WebHelp:iPod_Synchronization/4.0&oldid=8827"