CD will not eject after rip [#18689]

Get answers about the current version of MediaMonkey for Windows

Moderator: Gurus

bigredheadone
Berichten: 11
Lid geworden op: di jun 16, 2015 7:43 pm

CD will not eject after rip [#18689]

Bericht door bigredheadone »

When ripping a CD, I will check the box to eject the disc when finished but when it has completed it does not eject.
Am I missing a setting somewhere?
Lowlander
Berichten: 59914
Lid geworden op: za sep 06, 2003 5:53 pm

Re: CD will not eject after rip

Bericht door Lowlander »

Which Build (Help > About) are you using and are you able to eject the CD from File Explorer (to check if this works on the drive itself)?
bigredheadone
Berichten: 11
Lid geworden op: di jun 16, 2015 7:43 pm

Re: CD will not eject after rip

Bericht door bigredheadone »

5.0.2.2527

Yes it will eject in Window File Explorer.

I will check the eject box on rip, but the setting is undone when confirming rip.
bigredheadone
Berichten: 11
Lid geworden op: di jun 16, 2015 7:43 pm

Re: CD will not eject after rip

Bericht door bigredheadone »

By the way, auto eject after rip does work in competitors media player.
Lowlander
Berichten: 59914
Lid geworden op: za sep 06, 2003 5:53 pm

Re: CD will not eject after rip

Bericht door Lowlander »

I checked and it worked as expected on 5.0.2.2528

Can you Rip a CD with the option disabled, then Rip a CD with the option enabled. Does it still fail to do this?
bigredheadone
Berichten: 11
Lid geworden op: di jun 16, 2015 7:43 pm

Re: CD will not eject after rip

Bericht door bigredheadone »

Have ripped CD in Windows Media Player and MusicBee. CD will eject after rip in both.

Code: Selecteer alles

Drive	D:
Description	CD-ROM Drive
Media Loaded	No
Media Type	DVD Writer
Name	hp DVD A  DS8A8SH ATA Device
Manufacturer	(Standard CD-ROM drives)
Status	OK
Transfer Rate	-1.00 kbytes/sec
SCSI Target ID	0
PNP Device ID	IDE\CDROMHP_DVD_A__DS8A8SH_______________________KH61____\5&1E7AA32C&0&1.0.0
Driver	C:\WINDOWS\SYSTEM32\DRIVERS\CDROM.SYS (10.0.19041.1266, 171.50 KB (175,616 bytes), 10/1/2021 7:12 PM)


OS Name	Microsoft Windows 10 Pro
Version	10.0.19043 Build 19043
Other OS Description 	Not Available
OS Manufacturer	Microsoft Corporation
System Name	DENNIS-HP
System Manufacturer	Hewlett-Packard
System Model	HP EliteBook 8460p
System Type	x64-based PC
System SKU	SP604UP#ABA
Processor	Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date	Hewlett-Packard 68SCF Ver. F.67, 2/13/2018
SMBIOS Version	2.6
Embedded Controller Version	151.78
BIOS Mode	Legacy
BaseBoard Manufacturer	Hewlett-Packard
BaseBoard Product	161C
BaseBoard Version	KBC Version 97.4E
Platform Role	Mobile
Secure Boot State	Unsupported
PCR7 Configuration	Binding Not Possible
Windows Directory	C:\WINDOWS
System Directory	C:\WINDOWS\system32
Boot Device	\Device\HarddiskVolume1
Locale	United States
Hardware Abstraction Layer	Version = "10.0.19041.1151"
User Name	Dennis-HP\Dennis
Time Zone	Central Standard Time
Installed Physical Memory (RAM)	16.0 GB
Total Physical Memory	15.9 GB
Available Physical Memory	12.4 GB
Total Virtual Memory	31.9 GB
Available Virtual Memory	28.3 GB
Page File Space	16.0 GB
Page File	C:\pagefile.sys
Kernel DMA Protection	Off
Virtualization-based security	Not enabled
Device Encryption Support	Reasons for failed automatic device encryption: PCR7 binding is not supported, Hardware Security Test Interface failed and device is not Modern Standby, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions	Yes
Hyper-V - Second Level Address Translation Extensions	Yes
Hyper-V - Virtualization Enabled in Firmware	No
Hyper-V - Data Execution Protection	Yes
Peke
Berichten: 18773
Lid geworden op: di jun 10, 2003 7:21 pm

Re: CD will not eject after rip

Bericht door Peke »

Hi,
I also tested on three drives (including one external) and all three ejected CD after RIP.
Best regards,
Peke
MediaMonkey Team lead QA/Tech Support guru
Admin of Free MediaMonkey addon Site HappyMonkeying
Afbeelding
Afbeelding
Afbeelding
How to attach PICTURE/SCREENSHOTS to forum posts
bigredheadone
Berichten: 11
Lid geworden op: di jun 16, 2015 7:43 pm

Re: CD will not eject after rip

Bericht door bigredheadone »

I have ripped cd with Windows Media Player and MusicBee and both eject cd successfully.
MM5 is not. Could this be a registry error?
Erwin Hanzl
Berichten: 1190
Lid geworden op: di jun 13, 2017 8:47 am

Re: CD will not eject after rip

Bericht door Erwin Hanzl »

Eject CD after ripping works for me with MM 5.0.2.2528 RC-4 without any problems.

My parameters:

Afbeelding
MMW 4.1.31.1919 Gold-Standardinstallation
bigredheadone
Berichten: 11
Lid geworden op: di jun 16, 2015 7:43 pm

Re: CD will not eject after rip

Bericht door bigredheadone »

I think MM5 may not be recognizing all the capabilities of my CD player.

If I do not have a CD in the tray and then click rip, I receive a message box stating there is not a CD present and an open tray button appears.
I press that button and the tray opens.

On the window depicted below the only option already checked on the menu is rip on the fly. I can check the eject CD after ripping button, level track volume or verify ripped track but when I click ok it does rip the CD but will not eject upon completion.
When going back to ripping options the only box still ticked is the rip on the fly. It is not retaining the previous task checked. Just the rip on the fly.

I just don't get it. Why will it work in the other programs and not MM? I have exhausted everything I can think of and it still does on work.
Lowlander
Berichten: 59914
Lid geworden op: za sep 06, 2003 5:53 pm

Re: CD will not eject after rip

Bericht door Lowlander »

Please capture the failure to save Rip settings in a debug log (step 4b), using the same steps you outlined above, then attach the log to a Support Ticket: viewtopic.php?f=30&t=86643

This will help a developer analyze why the settings aren't being saved (which is the likely problem).
Ludek
Berichten: 5131
Lid geworden op: vr mar 09, 2007 9:00 am

Re: CD will not eject after rip

Bericht door Ludek »

Hi,
thanks for reporting, good catch!

It's really that the settings does not persist.

To be fixed as https://www.ventismedia.com/mantis/view.php?id=18689
Plaats reactie